SKF 6008-2Z/C3VA2101 Single Row Ball Bearings

e:10 mm; Designation of bearing:US210-31G2T04; L:165 mm; Weight:2.78 kg; C:35.1 kN; J:138 mm; G:M6x1; A4:28 mm; Designation of housing:FC210N-; A:40 mm;

Designation of bearing:EX206-19G2L3; N1:21 mm; B1:48.3 mm; L:165 mm; B:36.4 mm; A1:30 mm; Designation of housing:P206-; C:19.5 kN; A:48 mm; d1:44.1 mm;

C:36 mm; SW:4.76 mm; B:61.9 mm; T max.:100 °C; C0:51.8 kN; G:3/8-24UNF; Weight:2.95 kg; S:31 mm; d1:89 mm; B2:23.9 mm;

UPC:782476750077; Ship Weight:0.26 LB; Bearing Duty:Normal Duty; Manufacturing Plant Location:Crossville, TN - DC; Brand:Baldor-Dodge;

Designation of bearing:US205-14G2T20; C0:7.88 kN; N1:19 mm; Designation of housing:PE205N-; Weight:0.75 kg; L:130 mm; A1:21 mm; N:11mm; S:7.5 mm; G:R1/8";

A1:19 mm; Weight:0.63 kg; Dz:54 mm; G:R1/8"; T min.:-20 °C; Z:62.9 mm; E:10 mm; C:12.8 kN; L:65 mm; Recommended tightening torque for set screw:5.5 Nm;

s1:34.1 mm; d1:44.1 mm; C:19.5 kN; N:M10; H1:11 mm; H:42.9 mm; B:36.4 mm; Designation of bearing:EX206-20G2; H2:82 mm; C0:11.2 kN;

Pillow Block:STANDARD PLAIN EXT C; UPC:782475969623; Housing Type:Standard Series Plai; Vibration Sensor Indicator:No; Ship Weight:882 LB; Heater Indicator:No heaters; Brand:Baldor-Dodge; Liner Bore Size:6.9375 in; Bearing Insert Material:Steel; Liner Type:EXTERNALLY COOLED;

rs min:0.3 mm; Brand:NTN; d:10 mm; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:2.56 Hz; Mass:0.02 kg; Da max:24 mm; Characteristic cage frequency, FTF:0.37 Hz; Dynamic load, C:4.55 kN; Fatigue limit load, Cu:0.09 kN;

L1:42 mm; G:M6x1; Designation of bearing:UC204-12G2L4; C:12.8 kN; Designation of housing:P204-; N1:19 mm; T max.:100 °C; N:13mm; J:95 mm; H2:65 mm;

Anti-Rotation Pin:Yes; Ball Grade:Class 10; Ship Weight:6.9 LB; Retainer Type:Max Life Cage; Ball Bearing Housing Series:211 Series; Self Aligning:Self Centering; Flinger Type:Standard; Housing Coating:Powder Coat; Housing Type:2 Bolt Pillow Block; Grease Type:DuPont Krytox GPL 20;

A:36 mm; Designation of bearing:US207-23G2; A2:44.5 mm; J:92 mm; L:118 mm; N:14mm; C0:15.2 kN; C:25.7 kN; Designation of housing:FE207N-; A1:12.5 mm;

T max.:100 °C; C:19.5 kN; C0:11.2 kN; A4:23 mm; e:10 mm; B:30 mm; Designation of bearing:US206-20G2T04; H3:80; A2:32 mm; Designation of housing:FC206-;

rs min:1 mm; Mass:0.28 kg; Lubrication hole on inner ring:Non/No; d:85 mm; t:2.5 mm; Brand:NTN; ras max:1 mm; F:95 mm; da min:90 mm; B:26 mm;

A1:27 mm; Recommended tightening torque for set screw:11.5 Nm; H1:19 mm; d:35 mm; G:R1/8"; N:14mm; A:45 mm; s1:21.45 mm; L:163 mm; C:25.7 kN;